Bộ Đồng Hồ Đo Điện Áp Đa Năng 100a Ac 80v-260v 20a / 100a 4 Trong 1

This meter can only be used with one-phase AC power. And it can only measure the active power. Store energy data when power off, button available for controlling. Also with overload alarm function, backlight and power will flash when exceeding the preset value. Features: 4 in 1, with multiple electrical parameter measurement function. Large-screen LCD can display voltage, current, active power, energy at the same time. Dual measurement of AC voltage, AC current with AC current transformer. With overload alarm function, backlight and power will flash when exceeding the preset value. The blue backlight can be turned on/off manually. One button to operate, easy to use, no power needed. Store energy data when power off, button available for controlling. Energy measurement is nonvolatile with power interruption. It can be reset to zero via reset button. Specifications: Working voltage: 80 ~ 260VAC Rated power: 100A/22000W Working Frequency: 45-65Hz Test Range and Display format: Power: test range: 0~22kW < 1kW, display: 0.0~999.9W 1kW~10kW, display: 1000~9999W > 10kW, display: 0.1~22.0kW Energy: test range: 0~9999kWh <10KWh, display: 0~9999Wh >10kWh, display: 10~9999kWh Voltage: test range: 80~260V(single-phase) Display: 80~260V Current: test range: 0~100A Display: 0.00~99.99A Operating Temperature: -10 oC ~65 oC Operating Humidity: 35~85% RH Accuracy: ±1% Power consumption: 0.2W Measurement speed: 2 times/s Item weight: 105g / 3.70oz Package weight: 113g / 3.99oz Hole size: 8.5 * 4.5cm / 3.35 * 1.77in Item size: 9 * 5 * 2.5cm / 3.54 * 1.97 * 0.98in Package size: 10 * 6 * 5cm / 3.94 * 2.36 * 1.97in Button control: 1. Backlight control: Short press to turn on or turn off the light 2. Power cleared: Long press for 5 seconds till the number on the screen flashes, then stop pressing. Short press again, data will be cleaned and log out flashing mode. Long press for 5 seconds again, the data will be saved and log out the power cleaned mode. 3. Power alarm settings: Long pressing until "SET CLr" appears in the power area. Then, short press to add one (+1), the setting will move to another digit automatically after 3 seconds. Long press for 5 seconds to log out after finishing setting. Notes 1. This module is suitable for indoor, not outdoor 2. Applied load can not exceed the rated power. Package List: 1 * AC Power Multimeter 1 * Current Transformer Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....